It’s also available with a plate-mounted preamp (see product #270396).Â
- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
- Balanced, transformerless output for increased immunity to noise over long cable runs
- Supplied stand-mount adapter for portable applications
- 50Hz–17kHz
Output Impedance
- 180 ohms actual (EIA rated at 150 ohms)
- Sensitivity (At 1,000 Hz, open circuit voltage*)
- Cardioid: -35.0 dBV/Pa (17.8 mV)
- Supercardioid: -33.5 dBV/Pa (21.1 mV)
- All values -12dB at 0 gain; *1 Pascal = 94dB SPL
- Maximum SPL (1kHz at 1% THD, 1 kohm load)
- Cardioid: 124.2dB
- Supercardioid: 122.7dB
- All values +6dB at 0 gain
Equivalent Output Noise (A-weighted)
- Cardioid: 28dB SPL
- Supercardioid: 26.5dB SPL
Signal to Noise Ratio (referenced at 94dB SPL)
- Cardioid: 66dB
- Supercardioid: 67.5dB
Dynamic Range at 1 kohm load
- 96.2dB
- 100dB at 0 gain
Common Mode Rejection
- 45dB minimum
Preamplifier Output Clipping Level (1% THD)
- -6.0 dBV (0.5 V)
- -12 dBV at 0 gain
Polarity
- Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector
Power Requirements
- 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements
- Operating Temperature Range: -18 to 57 degrees ºC (0 to 135 degrees ºF)
Relative Humidity
- 0 to 95%
Cable Length
- 9 m (30′)
| Color | Black Cardioid |
|---|



















Reviews
There are no reviews yet.